Resetting using adjustment program:
1. Run adjustment software by clicking “APSC6364_Ver16.exe”
2. Set model name and port, Ok
3. Click maintenance tab
4. Check waste ink pad counter
5. Click reset
Resetting using SSC serve ver 4.30
* Run SSC serve software
* Set printer model setting in ssc serve to C63/C64/C65/C66 the close the setting
* Right click ssc icon in system tray, select protections counter, select reset protection c counter.
* Clcik Yes
download software here
Compatibility and system requirements :Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printers carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
**********
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
**********
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart theprinter.
------------------------------------------------
I have tried the above steps, all steps were perform correctly; BUT I am still not able to reset the "color Ink low" message. Please HELP.
Procedure to reset Printer canon MP145 and Canon MP160 with Error Code Message for Printer Canon MP145 and Canon MP160, you can find error code message the end of this post:
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)
Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error
My pixma IP1000 has messages "Waste Ink Full"
I try to reset with manual service mode :
- Turn off the printer, and disconnect the printer cable
- Press and hold the POWER button, turn on the printer
- The Indicator (LED) should be green
- Press and release the RESUME button, the Indicator (LED) should be orange
- Press and release the RESUME button again, the Indicator (LED) should be green
- Release both button
After I try, it work successfull. But, when I turn off the printer and I turn on again I has messages "Waste Ink Full"
How to reset permanently? Averybody, anybody, when you have another service mode help me on my printer ploblem
Compatibility and system requirements :
Operating System Support :How To Reset Waste Ink Canon IP1500
Step 1 Manual for Service mode to reset waste ink or blinking canon ip1500
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
Step 2 Use software for Permanent to reset waste ink, read here step by step and tool to reset permanent waste ink.
This methode to reset epson c45 blinking using software resetter. Epson C45 blinking because of counter have full. To back normal again the printer have to be reset. Software resetter for epson c45 can be use SSC service utility or Adjustment Program Epson C45.
Resetting Use Adjustment Program for Epson C45
* Download Software Adjustment Program for Epson C45
* UNZIP the file C4146.rar and RUN 94max.com file
* Choose stylus c45 in the model name then klik ok
* Click Maintenance Tab
* Check Protection counter to view counter value
* Clearing protection counter (reset counter to zero)
* Then click Ok, Ok
* done
Note : Adjustment program epson C45 can be use for printer epson C41SX, C41UX, C42SX, C42UX, C43SX, C43UX, C44UX, C46 and ME1
Resetting use SSC service utility
* SSC service utility sscserve.exe for epson printers (new version sscserve ver 4.30)
* Install the program
* Turn on the printer epson c45
* Then run SSC service utility by click Start – Program – SSC Service utility – SSC Service utility
* equalize the configuraton for your printer, for epson C45 select C4X then close configuration windows.
* Right click SSC service utility icon in System Tray.
* Then choose reset protection counter
* Turn off the printer and turn on again (Once the process is complete printer epson c45 normal again)
Main features.
SSC Service Utility allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).
Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.
NOTE ! You can lost Epson lifetime guarantee on print head by refilling ink cartridges!
Latest versions changes:
New in 4.30:
- support for R270
- support for R240
- support for R340
- support for CX2800
- support for CX3900
- support for CX4900
- support for CX5900
- support for C58/C59
- support for RX640
- improved support for C2100/2200
- improved support for RX700
- improved support for R2400
- improved support for 785EPX/825/895/915
- some other improvements and bug fixes
New in 4.20:
- support for CX4200/CX4700/CX4800/DX4200/DX4800
- support for C47/C48
- support for RX430
- support for CX6500/CX6300
- improved support for CX6400/CX6600
- improved support for RX500/RX510
- improved support for RX600/RX610
- improved support for R1800
- improved support for CX3700/CX3800/DX3800/DX3850
- improved support for C67/C68/D68
- improved support for C87/C88/D88
- many new chip models supported
- some other improvements and bug fixes
New in 4.10:
- support for PM-970C
- support for PictureMate
- support for RX700
- support for R2400
- support for PM-A700
- support for PM-G720
- support for RX520
- support for CX7800
- support for CX4100
- support for DX3800
- support for CX3800/CX3810
- support for CX3700
- support for C67/68 and Photo Editions
- support for C87/C88/D88 and Photo Editions
- support for R220/R230
- support for R320
- support for CX4500
- support for CX3650
- various bug fixes
New in 4.00:
- ability to work with additional reset device
- support for CX4600
- support for CX5300
- support for CX5100
- support for RX420
- support for RX425
- support for RX620
- support for R1800
- improved support for almost all other printers
- improved ink freezer
- improved ink monitor, implemented status information
- protection counter reset improvements
- various bug fixes
Full version history is in the help file included in distribution.
Supported printer models >>>
Please, read all instructions in help file before doing anything with Your printer!
Please, post filled test report form generated by the program (test report button) to us in case of any software problem or if Your printer is unsupported by this software (read instructions how to make test report in this case in help file) !
Program screenshots:
NOTE!
1) This is freeware project, so it is illegal to take money for this software.
2) Distribution of this software from any site other then www.ssclg.com or one of our official partners sites is prohibited!
(с) 2002-2007 SSC Localization Group
Send your test reports and support requests (with reports) to this e-mail
You can discuss software in this forum.
End user agreement
1) This software is provided "as is" without any express or implied warranty of any kind including, without
limitation, warranties of merchantability, non-infringement or fitness for any particular purpose.
2) You are liable for all risks in relation to the quality or performance of this software. In no event shall SSC Localization Group or personally, author of this software, be liable for any damages whatsoever caused to you or the third party arising out of the use or inability to use this software. Damages include general damages, special damages, accidental damages or consequential damages (including, without limitation, loss of data or accuracy or unfitting interface for other programs, or problems with peripheral equipment).
2) You understand the risk of whole head or individual nozzles clogging in case of tardy replacing of empty cartridges, as well as risk of using hot swapping function (this include frequently cartridges replacement, or wrong deblocking of parking head on some models). You understand, that resetting the ink level counters or using ink freezer function implies responsibility to carefully watch ink levels in all cartridges and timely (as soon as You see any raw white bands, even in one color) replace cardridge.
I agree with all above statements and want to download software (v4.30)
Download Linux Ubuntu - Ubuntu kemarin baru saja merilis versi terbarunya yaitu ubuntu 12.10 dengan kode nama Quantal Quetzal, ubuntu 12.10 merupakan rilis ke-17 dari dari sistem operasi Ubuntu yang akan mendapatkan dukungan selama 2 tahun, hingga April 2014.
Image Sensor: | High quality 1/4 CMOS sensor |
Effective Pixels: | 480K pixels ( Interpolated 8M pixels still image & 4M pixels video) |
Video Resolution: | Max. upto 2304 x 1728 pixels |
Image Resolution: | Max. upto 3264 x 2448 pixels |
Frame Rates: | 30 frames per second |
Colour Depth: | 24-Bit True Colour |
Interface: | USB 2.0, backward compatible to USB 1.1 |
Focus: | 5 cm to Infinity |
Microphone: | Built-in high sensitive USB microphone |
Snap Shot Button: | Built-in snap shot button |
Night Vision: | 6 LED’s for night vision, with brightness controller |
Low Light Boost: | Automatic low light boost |
White Balance: | Auto |
Auto Exposure: | Auto |
Auto Compensation: | Auto |
Auto Tracking: | Auto face tracking function |
Zoom: | 4X Digital Zoom |
Video Effects: | 10 photo frames and 16 special effects |
OS Compatibility: | Windows XP / Vista & 7 |
Bundled Softwares: | Driver for Windows with 10 Photo frames, 16 Special effects & Auto Face Tracking and more. |
MRP: | Rs. 1199/- |
Warranty: | 2 Years |
Operating System; Windows 2000/XP/Vista/7 
