How to Reset Ink Levels

Ink levels are light to adjust if you mortal the straitlaced tools. A approach resetter is utilised to reset virtually every ink cartridge droppings to a whole mounting. These tools are disposable online at ink-supply stores. They amount in universal models and for proper types of machine cartridges. Impose one to gain resetting the ink even in your printer a picnic. It gift bonk near 10 seconds to perform the entire set treat. Afterward, your computer give orotund.
Square the chip-resetting means on a matted tableland with the notched move of the pattern grappling up. The conductor pins exclusive the resetter should present up, as wellspring.

2Judge the semiconductor tabs on the cut of the printer cartridge you necessary to adjust. They are copper-colored tabs, voice of the journeying on the select of the pickup.

3Connecter up the tabs with the cutting in the reset device and pushing the cartridge all the way into the mar resetter. Wait at the indorse of the resetter to see the red pale locomote on. This way conjunction between thecartridge and design has been made.

4Drive softly on the pickup until the veggie shallow starts to blink. This way the adjust has performed right.

5Supply the cartridge backwards into the machine. Effort create a attender or pic by choice it on your computer and clicking on "File" and then selecting "Indicant" as you commonly would. The printer leave begin without an evil communication.

How to Reset counter EPSON STYLUS C63 C64 C65 C66

Resetting using adjustment program:

1. Run adjustment software by clicking “APSC6364_Ver16.exe”
2. Set model name and port, Ok
3. Click maintenance tab
4. Check waste ink pad counter
5. Click reset

Resetting using SSC serve ver 4.30

* Run SSC serve software
* Set printer model setting in ssc serve to C63/C64/C65/C66 the close the setting
* Right click ssc icon in system tray, select protections counter, select reset protection c counter.
* Clcik Yes
download software here

How To Reset Waste Ink Canon IP1500

How To Reset Waste Ink Canon IP1500
Step 1 Manual for Service mode to reset waste ink or blinking canon ip1500

1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

Step 2 Use software for Permanent to reset waste ink, read here step by step and tool to reset permanent waste ink.

HOW TO CHANGE THE TONER ON AN HP LASERJET 4250 4350

How to Change the Toner on an HP Laserjet 4250/4350
Large format laser printers such as HP Laserjet 4250 and 4350 are excellent choices for businesses. These printers allow companies to share resources, reduce costs by eliminating the need to purchase individual desktop printers for each office. But in order to maintain good working printers, operators need to ensure that the toner cartridges are changed regularly. When the print quality begins to fade, change the toner cartridge will restore the previous print quaity.

Instructions
things you need:
Printer
Ink Cartridge

1 Open the toner cover and carefully lift the toner cartridge from the printer. Leave the toner cartridge aside for recycling.
2 Remove the new toner cartridge from its box and remove any packing material. HP makes these packaging materials orange or green in color making them easy to find. When unpacking the new toner cartridge, be sure to find the label of recycling, a prepaid label that lets you return the used cartridge for recycling.
3 Slide the new toner cartridge into the printer until it snaps into place. Close the toner cartridge. If the toner cartridge is not installed properly, the door will not close.
4 Send a print job to the printer and check print quality. If the paper is blank, remove the cartridge and make sure they have got rid of all packaging materials. The toner cartridges are shipped with protective tape in place to prevent toner from leaking during transport.

HOW TO RESET DELL PRINTER INK LEVEL

How to Reset the Ink Level in a Dell Printer,
Dell printers are cheap but the ink cartridges are not. One way to save money on refilling ink cartridges used ink cartridges or not to buy the Dell brand. The only problem is to reset the ink level program in the Dell. When filling an ink cartridge, Dell printer still thinks the cartridge is empty. And Dell ink cartridges brand do not contain the chip that tells the printer that a new cartridge is installed. There is a way to reset the ink level in the Dell printer.

Instructions
Resetting the ink level - ink cartridge Dell
1 Dell printer off, if you are on. Wait five seconds.
2 Turn the printer on Dell. A dialog box with the inscription "XXX XXX Dell printer" appears on the computer screen. The X represents the number of type and model of your Dell printer. If you do not get this dialog box, click the icon for the Dell printer control program is set to "Desktop" on your computer or select from the "All Programs" menu, if you use a Windows system, or from the "Finder" if using a Mac system
3 Situation in the dialog box of "full-A-Print." If there is a checkmark in the box next to the text, click the check mark to remove it. If there is a checkmark in the box, do nothing.
4 Click the box next to the text "Do not show this dialog again."
5 Click Continue Printing "to close the dialog box. You have now reset the ink level in the Dell.

How to reset T1281 T1284 refillable cartridges Apec Chip

If a refillable cartridge is not recognised by your Epson printer and it uses an Apec type chip, then you will need to manually reset it!  To do this just touch both the pins shown in the diagram at the same time with a small metal object.  This will reset the counter back to full again.
Fortunately this problem does not happen too often, however this information may be of some use to you in the future. 
We sell the set of 4 Compatible Fox Empty Refillable Ink Cartridges with auto reset chips fitted for use with Epson S22 SX125 SX130 SX225W SX235W SX420W SX425W SX525 SX525W printers to replace T1281 / T1282 / T1283 / T1284 at... https://www.printercartridges.net/printercartridgesstore/index.php?main_page=product_info&cPath=116&products_id=1444  Refill ink is also available from http://www.printercartridges.net/  If you buy both products at the same time then please request free syringes!

HOW RESET HP4000 4050 4100 5000 HP 4500 4550 LOW INK WARNING

How to reset hp4000, 4050, 4100, 5000 - hp 4500, 4550 message low ink warning ? these manual methods for HP 4000, 4050, 4100, 5000 and HP 4500, 4550

HP 4000, 4050, 4100, 5000 Message Reset Manual Methods 

Turn the printer off
Hold down the left side of the issue and VALUE + / - keys
Turn the printer off and wait until RESET MAINTENANCE COUNT is displayed
then release the keys

HP 4500, 4550 Message Reset Manual Methods 
Turn the printer off
Hold down Cancel Job and SELECT keys and turn the printer and wait until the screen goes blank and the LED of three let
Press the right side of the MENU key, then press the SELECT
You enter in service mode after the normal test complete
Press ITEM until the fuser count appears MAINTENANCE
Press VALUE + / - to change to zero
Press SELECT to save
Click GO, the printer should return to READY

Tag: reset hp 4000, 4050, 4100, 5000 - hp 4500, 4550 message low ink warning 

HOW RESET INK LEVEL HP21 HP22 HP 27 HP 28 HP 56 HP57 HP 58

How reset ink level HP Cartidges HP21 and HP22, HP 27, HP 28, HP 56, HP57, HP 58.


INK LEVEL RESET FOR HP Cartridges HP 22
Remove the cartridge from the printer.
Place a piece of tape over the contact to the upper left as shown in red in the photo at right.
With the tape covering the cartridge back into place contact the printer.
The printer will be held and the alignment page. (Some newer models no longer print page alignment. If the printer runs through a series of priming routines and stops for 20 seconds continue through to the next step)
Once an alignment page is printed remove cartridge from the printer.
Place a piece of tape over the second contact shown in red.
Place the cartridge into the printer with both pieces of tape. (One covering the first contact and cover the second contact.)
The printer will print another alignment page. (Some newer models no longer print page alignment. If the printer runs through a series of priming routines and stops for 20 seconds continue through to the next step.)
Once the second alignment page is printed remove cartridge from the printer.
Remove the pieces of tape cartridge contacts
Make sure that no residual adhesive on cartridge contacts.
Place the cartridge into the printer. Cartridge should now read full.

Note: This reset methode not only for HP21 and HP22 but can be used to cartidges HP HP 27, HP 28, HP 56, HP57, HP 58

How to reset waste ink blinking printer canon ip4200

How to reset waste ink / blinking printer canon ip4200

With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)

While holding the Power button, release theresume/Cancel button. (DO NOT release the Power
button.)

While holding the Power button, press the Resume/Cancel button 2 times, and then release both
the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

When the Power LED lights in green, press the Resume/Cancel button the specified number of
time(s) setting).

Time(s) LED indication Function Remarks 0 times Green (Power) Power off When the print head is not installed, the carriage returns and locks in the home position capped.
1 time Orange (Alarm) Service test print .
2 times Green (Power) EEPROM information print
3 times Orange (Alarm) EEPROM initialization
4 times Green (Power) Waste ink counter resetting
5 times Orange (Alarm) Destination settings After entering the destination settings mode, press the Resume/Cancel button the specified number of time(s) to select the destination. For detail, see "Destination settings procedures" below.
6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)
7 times Orange (Alarm) Reserved
8 times Green (Power) CD / DVD check pattern
9 times Orange (Alarm) CD / DVD print position
correction (horizontal: X direction)
10 times Green (Power) CD / DVD print position
correction (vertical: Y direction)
11 to 13 times Orange, Green, Orange(Alarm,
Power,Alarm) Return to the menu selection
14 times Green (Power) Left margin correction Not used in servicing.
15 times Orange (Alarm) Return to the menu selection


Time(s) LED indication Destination CD / DVD print
0 times Green (Power) No change of the destination
1 time Orange (Alarm) Japan Supported
2 times Green (Power) Korea Not supported
3 times Orange (Alarm) US Not supported
4 times Green (Power) Europe Supported
5 times Orange (Alarm) Australia Supported

How to stir fry pasta

Recipe for stir fried pasta:

What you need:
1 pip garlic, crushed or finely chopped
1 egg
500g pasta, shown above is conchiglie pasta (Shells)
Powdered Chicken stock (optional)
Dark soya sauce
Salt & Pepper

Method:
1. Pre-boil water in a pot, add 2tbsp of salt *optional.
2. When water is boiling, pour in pasta and stir the bottom every 1-2 minutes, to ensure pasta does not stick on the bottom of the pot.
3. Boil about 10-15minutes and check the package for suggested cooking time.
4. Take 1 piece of the pasta and bite through it to check if it is ready. When it is chewy but firm in the centre, it is ready. If it is hard to bite and if you see white in the centre of the pasta, that means you have to cook it a little longer.
5. Empty the pasta pot into a strainer. Shake out excess water.
6. Heat your wok with oil (any cooking oil will do), when oil is hot, put in chopped/crushed garlic, quickly stir as garlic gets burned fast. Stir for 10 -15seconds, add in egg and stir again. Once the eggs are halfway cooked, add in pasta and seasoning (dark soya sauce,chicken stock, salt& pepper). Add a bit of water if you wish to. Serve hot.

List of Printer Error and How to Fix it

Carriage error or Error Code 5100

Condition: An error occurred in the carriage encoder signal.
Problems and Solutions:

• Smearing or scratches on the carriage slit film
  - clean the timing slit film.
• Foreign material or paper debris that obstructs the carriage movement;
   - remove foreign material.
• Ink tank conditions;
   - re-seat the ink tanks.
• If other solution fail, replace one off the following
  - Timing slit disk film
  - Carriage unit
  - Logic board
  - Carriage motor

Line Feed error or Error Code 6000
Condition: An error occurred in the LF encoder signal.
Problems and Solutions:

• Smearing or scratches on the LF / EJ slit film
  - clean the LF / EJ slit film.
• Foreign material or paper debris in the LF drive;
  - remove foreign material.
• If other solution fail, replace one off the following
  - LF / EJ slit film
  - LF / EJ timing sensor unit
  - Paper feed roller unit
  - Logic board
  - Paper feed motor

Purge cam sensor error or Error Code 5C00
Condition: An error occurred in the purge unit.
Problems and Solutions:

• Foreign material or paper debris around the purge drive system unit;
  - remove foreign material.
• If other solution fail, replace one off the following
  - Purge drive system unit
  - Logic board

ASF sensor error or Error Code 5700
Condition: An error occurred in the ASF cam sensor.
Problems and Solutions:

• Replace one of the following:
  - ASF unit
  - PE sensor board unit
  - Logic board

Internal temperature error or Error Code 5400
Condition: The internal temperature is not normal.
Problems and Solutions:

• Replace one of the following:
  - Carriage unit
  - Logic board
  - Print head

Ink absorber is full or Error Code 5B00, 5B01
Condition: The ink absorber is supposed to be full. Message on the Monitor screen or printer LCD: Ink absorber full. Service required.
Problems and Solutions:

• Ink absorber is full or waste pad inside the printer is almost full
  - Replace printers Ink absorber pad and reset the ink absorber counter value in the EEPROM.

Print head temperature rise error or Error Code 5200
Condition: The print head temperature exceeded the specified value.
Problems and Solutions:

• Turn off the printer and then turn on if error still persist replace Ink cartridge or print head

EEPROM error or Error Code 6800, 6801
Condition: A problem occurred in reading from or writing to the EEPROM.
Problems and Solutions:

• Replace logic board

VH monitor error or Error Code B200
Condition: The print head voltage is abnormal.
Problems and Solutions:

• Replace Print head and logic board (Replace them at the same time.)
• Replace Power supply unit 
• Check and Clean Head contact pin condition of the carriage unit
• Check Cable connection especially the carriage FFC

Carriage lift mechanism error or Error Code 5110
Condition: The carriage did not move up or down properly.
Problems and Solutions:

• Foreign material or paper debris that obstructs the carriage movement
  - remove foreign material.
• Consider replacing:
  - Switch system unit
  - Carriage unit

APP position error or Error Code 6A80
Condition: An error occurred in the APP motor.
Problems and Solutions:

• Check for foreign material or paper debris around the purge drive system unit
  - remove foreign material.
• Check for foreign material or paper debris around the ASF unit
  - remove foreign material.
• If other solution fail, replace one off the following part
  - Purge drive system unit
  - Logic board

APP sensor error or Error Code 6A90
Condition: An error occurred during paper feeding or purging.
Problems and Solutions:

• check for foreign material or paper debris around the purge drive system unit;
  - remove foreign material.
• check for foreign material or paper debris around the ASF unit;
  - remove foreign material.
• If other solution fail, replace one off the following part
  - Purge drive system unit
  - Logic board

Paper feed cam sensor error or Error Code 6B10
Condition: An error occurred in the paper feed cam sensor during paper feeding from the cassette, or the paper absorbing a large amount of ink jammed in the PF rear guide.
Problems and Solutions:

• Jammed paper in the PF rear guide (when a large amount of ink was absorbed in the paper);
  - remove the jammed paper and foreign material.
• check for foreign material or paper debris in the cassette or in the PF rear guide;
  - remove foreign material.
• If other solution fail, replace one off the following part
  - PF pick-up unit
  - Logic board

USB Host VBUS overcurrent or Error Code 9000
Condition: The USB Host VBUS is overloaded.
Problems and Solutions:

• Replace Logic board

Pump roller sensor error or Error Code 5C20
Condition: The pump roller position cannot be detected.
Problems and Solutions:

• Replace Purge drive system unit

Ink tank position sensor error or Error Code 6502
Condition: None of the ink tank position is detected.
Problems and Solutions:

• check Ink tank position
• Re-seat or replacement of ink tanks
• Replace parts
  - Spur unit
  - Logic board

Flatbed motor error or Error Code 5012
Condition: An error occurred in the scanner flatbed motor.
Problems and Solutions:

• replace Scanner unit

Valve cam sensor error or Error Code 6C10
Condition: The valve cam sensor was faulty at power-on or when purging was attempted.
Problems and Solutions:

• check for foreign material or paper debris around the purge drive system unit;
  - remove foreign material.
• Replace
  - Purge drive system unit
  - Logic board

What is BetterSurf and How to remove it

What is bettersurf?

Better is a malicious adware application installed on internet browsers (Chrome, Internet Explorer, Mozilla Firefox) as extension or browser helper object. It is usually comes as a complimentary to a free application software. Some software may provide the options to exclude it during installation process but others are directly forced to installed without warning. The common installation directory located at the C:Program FilesBetter-Surf or C:Program FilesBetterSurf where it folders for each of the browser with acronym (ch = google chrome, ff = firefox, ie = internet explorer). The primary file responsible for executing the ads is the Bettersurf.dll

The Bettersurf behavior

When user visiting any website the ads such as banners, text-link ads, and pops up automatically executed on the site. It adds the load of the browser and making it slower as a result more CPU usage incurred. This can be viewed on the Windows System Performance Monitor whenever bettersurf is running on the website you are visiting. In Google Chrome it installed one extension whereas Firefox and Internet Explorer at least two or three of them.

One of the popup ads shows as below with Affilliate ID 195299 which clearly intended to promote affiliate programs.

http://www.freelotto.com/register.asp?skin=CertifiedWinnerRSP&noepu=1&partner=1063817&affiliateid=195299&tid=29452683531386668782&utm_source=AdCash&utm_medium=Display&utm_term=CPA&utm_content=CertifiedWinnerRSP&utm_campaign=EveryoneWinsTV

BetterSurf Detection:

• On windows startup any antivirus (i.e. Avira) programs will detect the Bettersurf extension running on Mozilla firefox.
• Windows Defender will detect it running on Internet Explorer
• High usage of CPU when visiting websites and it slows down the browser when Bettersurf is running on the foreground.

How to remove BetterSurf from each browsers:

1. Google Chrome: Click Customize and Control icon>>Tools>>Extensions>>search Better Surf Plus 1.1 and click on the recycle bin icon to uninstall
2. Mozilla Firefox: Click on Tools>>Add-ons and Uninstall the Better Surf
3. Internet Explorer: In Windows 7 click Start>>Control Panel>>Programs (Uninstall Programs)>>Better Surf then right click mouse and uninstall.

After uninstalled for each of the browsers the extensions could still be there especially Mozilla Firefox and Internet Explorer. To remove it completely you will need to clean up the registry manually by doing the following

1. In Windows 7 – Click Start and Type “regedit” and press ENTER on the keyboard. The registry edit screen will popup
2. Click on the Edit tab and Find or press CTRL + F on the keyboard. Search “Bettersurf” keyword and delete each of the registry. Once deleted keep searching by pressing F3 on the keyboard and delete until it is no longer be found.
3. By deleting the registry the extension should be completely eliminated from Internet Explorer and Firefox

How to enable disable Classipress featured ads

Classipress premium theme is one of the Wordpress best classified ads theme you can find out there if you are doing directory advertising business online. The theme simple, sleek, professionally designed and the good thing about is the lifetime support from Apptheme. It means that if you have purchase the premium theme you are entitled to lifetime updates which is very important as the WordPress platform is constantly changing overtime.

One of the good feature of the Classipress is its featured ads slider, which is very cool and attractive to user. However due to its Java script coding sometimes it slows your site upload time especially for visitors who are having slower internet connection. Thus there is time you may need to disable the featured ads slider to keep the site upload speed time at its best all the time.

How to Enable / Disable Classipress 3.0.5.4 Featured Ads Slider

1. Login to Wordpress Control Panel Admin
2. In control panel under "Classipress" category => Click Pricing
3. General Settings =>Select the "Show Featured Ads Slider" either Yes/No

How to capture fix region image using Snagit 10

Snagit is a screenshot program (software) that operates under Windows Operating System. It is produced by TechSmith as is very easy to use to capture images on computers just by using the Print Screen button on computer keyboard. It is also comes with simple image editing to create attractive image effects such as torn edges, adding finger icons, etc.

Capture pictures in fixed size dimension or region is very useful when those pictures are intended to make a collage pattern. This will keep them standardize in size area and make the collage style looks clean. Here is a simple instruction how to capture fixed image dimension using Snagit 10.

1. Open Snagit 10 application
2. Click "Capture" tab ⇒ Input ⇒ Advanced ⇒ Fixed Region
3. Under Profile Setting Click "Fixed Region" ⇒ Properties ⇒ Fixed Region
4. Set the desired size dimension (region) "Width" and "Height"
5. Once it is done now you can start capture by pressing "Print Screen" button on keyboard

How to disable Dell Vostro 1200 touchpad

It was a frustrating experience when the network guy in our office gave me the new Dell Vostro 1200 notebook to use. I just couldnt find how the hack to disable the touchpad device. The touchpad keeps me away from typing properly because of its sensitivity, which means a slight touch of hands (fingers/palms) when typing can caused the mouse cursor to disposition somewhere else. As a result words always run out of line and its very frustrating.

I tried to disable the touchpad from the control panel>device manager however there was no option to do so other than mouse. It took me sometimes to figure how the touchpad work without an option to disable/enable it. After few hours of searching eventually i found the solution, which i think a little illogical. The solution to the problem is simply the driver was not installed but the irony is the touchpad still work normally except that it cannot be enable/disable. Perhaps i believe this problem happens to most dell laptops/notebook.

How to get the enable disable option for the Synaptic Touchpad on Dell Vostro 1200

1. Download the driver from Dell Drivers & Download site
2. Select Mouse & Keyboard and Download the Synaptic Touchpad Driver
3. Once downloaded proceed to install it on the computer
4. After installed Touchpad icon will show up on the Toolbar system tray
5. Double click on the Synaptic icon --> Device Select -->Disable

Resetter Epson L100 and How to Use it

Iam very grateful for the visitors of this blog is increasing every day. I will keep writing, hopefully, can provide benefits to all visitors. Here is I will try to post about Resetter Epson L100 and How to Use it. Obviously a lot of visitors who are looking for this resetter epson L100.

Resetter Epson L100 and How to Use it :
Resetter epson L100 can be downloaded at the following link Ziddu:
http://www.ziddu.com/download/14080411/resetterL100.7z.html
Password: ekohasan

Using 7zip compression format, if you dont have the software, you can download it at:
http://www.ziddu.com/download/14083147/7z920.exe.html
or
http://downloads.sourceforge.net/sevenzip/7z920.exe

For tips on downloading via ziddu order to more quickly and successfully, see the following links:
http://ekohasan.blogspot.com/2010/04/cara-download-file-di-ziddu-secara.html

Resetter Epson L100 and How Uses:

• Turn on Epson L100 and make sure that Espon L100 already connect to the computer with driver installed.
• Then run Resetter Epson L100, by double clicking the file "AdjProg cracked.exe"
• Click "accept">> "Particular Adjustment Mode">> Select "Waste ink pad counter reset">> click "Check">> uncheck "play pad counters, FL Boxes counter, tube Ink Counter", then click the "initialization"> > "Finish".

• The next step,turn off Epson L100 , then disconnect the power.
• The last step, reattach the power cord and turn on the printer, wait a while until Epson L100 ready.

Epson L100 is ready for use again.

How to refill ink for canon printer pixima iP 4300

How to refill ink for canon printer pixima iP 4300

How to change Classipress 3 1 5 Theme footer links

Changing the Classipress footer links to your link destinations help to promote your own sites or affiliate programs. Below is how you can change the way you want it. In Default the link name are "Classified Ads Software" and "Powered By Wordpress". You can change these names by editing the code highlighted in blue.

1. Log into Classipress admin control panel
2. Find "Appearance" category > Editor
3. In Editor on the left flank look for theme-footer.php > click on it.
4. In Edit mode look for the follow codes

<div class="right">
<p><a target="_blank" href="http://www.Kedey.com" title="Classified Ads Software"><?php _e(Classified Ads Software,appthemes); ?></a> | <?php _e(Powered by,appthemes); ?> <a target="_blank" href="<a href="http://www.appthemes.com/cp/go.php?r=6989&i=l0">WordPress Premium Themes</a>
" title="WordPress">WordPress</a></p>
</div>

5. To change URL link destinations change the code highlighted in red and to change the links wording edit the one highlighted in blue.

How to reset Internet Explorer 9 default homepage AVG homepage

There is always a catch when installing free application software (such as Free Antivirus, Free Spyware removal, etc) to your computer, and the most common are the free browser toolbars always comes with it. This problem are prone to affect Internet Explorer (IE) browser since it is the most used browsers on the net.

The major problem of having too many toolbars installed on a browser is that it can caused significant lags or sometimes freezed the browser and in fact most of them are not necessary to be there. It is just very irritating.

Since we cant really avoid from installing the Free browser toolbars apart from the Free software. All we can do is un-install to remove it either from the Windows Control Panel >> Add/Remove Programs or by Disabling the toolbar by clicking "Tool" tab on the browser and click "Manage Add-Ons".

After disabling and removing the default homepage of the browser still stays unchanged for example like the AVG homepage in my IE 9. How to change it simply go to

1. Go to Tool> Internet Options
2. Under the General tab change the default homepage to anything you like for example www.google.com or www.yahoo.com. And then click Apply

How to uninstall flash player components completely

Due to some unknown reasons, flash player components can be corrupted unexpectedly at times. When it happens usually error message will pop up with the “Repair” button to fix the problem. More often than not, clicking on the “Repair” button is not always working, so we have to use the last resort by removing all the flash player components from the system.

The uninstaller will help you to uninstall adobe flash player components such as Adobe Flash Player ActiveX, Adobe flash plug-in all at once. So you don’t have to waste your time to remove it one by one from the Windows Control Panel. Apart from that using the uninstaller also remove the file clean compare to manual removal.

How uninstall flash player components.

Step 1: Go to http://kb2.adobe.com/cps/141/tn_14157.html and download the uninstall_flash_player.exe.

Step 2: Once downloaded make sure all running applications such as web-browsers, instant messengers, etc that uses adobe flash are closed

Step 3: Run the uninstaller

Step 4: Upon completing the un-installation process restart your computer

Step 5: Back to Windows OS open your browser and go to http://www.adobe.com/software/flash/about/ to check that the flash player is successfully uninstalled

Step 6: To re-install flash player go to: http://get.adobe.com/flashplayer/

Why require Adobe uninstaller to remove the flash player component when we can do it on Windows Control Panel?

1. The uninstaller can remove the flash player components all at once (i.e. Adobe Flash Player ActiveX, Adobe Flash plug-in)
2. It removes all the related files completely