Sabtu, 12 April 2014

Masalah Absober Tank Is Full Canon

Cara Mengatasi :Waste Ink Tank Almost Full
You can reset the waste ink tank counter yourself. Be aware that this doesnt actually empty the waste ink tank itself (a little felt pad deep inside your printer), but it does allow you to continue printing.

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice, then release all buttons
5: When the indicator lights steady, press RESUME three or four times. The indicator should be orange.
6: Press Power to set data

To actually drain the waste ink tank, youll need to take your printer to pieces and find, clean, wash and dry the felt pads found in the base of the printer. This is a complicated procedure, but it is a good idea to do it if youre technically minded. Many people have just reset the code without actually draining the pads and very few have run into problems as a result. If you do this, you risk damaging your printer and/or the surface it sits on if the pads absorb too much ink. However, if youre going to buy a new printer anyway, you might just reset the code and stand it on a piece of paper or card. Its up to you, just understand the risks.Good Luck!

HP 4000 4050 4100 5000 Printers

  1. Turn the printer off
  2. Hold down the left side of the
  3. ITEM and VALUE +/- keys, turn the printer on and wait
    until
    RESET MAINTENANCE COUNT is displayed and then release the keys

Jumat, 11 April 2014

Canon BJC 5000

1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody

Kamis, 10 April 2014

RESET WASTE INK TANK CANON

For seri i250, i255, i350, i355, PIXUS 350i

indicates :
WASTE INK TANK Full, printer has no respon

The Solutions :

1. Download i320 Service Tool or 350,355,250,255 Service Tool
2. Do service mode procedure to printer, the methods are ::
- Turn off printer, Take off USB cabel dan power cabel
- Push and hold POWER button, take on power, Turn on printer
- Indikator LED will be in green colour
- Push and let RESUME button, indicator LED will be in yellow colour
- Push and let RESUME button once more, indicator LED will be in green colour
- Let POWER button

This time printer in MODE SERVICE

Reset Manual i255-i355.pdf

ManualReset_i320.pdf

3. Do reset waste ink tank procedure with :
4. take on USB cabel
5. Do program General Tool
6. The Figure will be like this :
7. Choose the parameter no 1
8. Put on no 2 according to printer canon, DON”T BE WRONG!!!
9.Congratulation… printer has been in Reset.

Rabu, 09 April 2014

Printer Service Manual Canon i470D i475D

This manual has been issued by Canon Inc., to provide the service technicians of this product with the information necessary for qualified persons to learn technical theory, maintenance, and repair of products. The manual covers information applicable in all regions where the product is sold. For this reason, it may contain information that is not applicable to your region.

This service manual consists of the following three parts to provide information necessary to service the i470D

Part 1: Maintenance
Information on maintenance and repair of the i470D

Part 2: Technical Reference
New technology and technical information such as FAQ’s (Frequently Asked Questions) of the i470D

Part 3: Appendix
Block diagrams and pin layouts of the i470D

Reference:
This manual does not provide sufficient information of disassembly and reassembly procedures. Refer to the graphics in the separate Parts Catalog.

http://www.savefile.com/files/1037657

Selasa, 08 April 2014

Canon MP390

1)Printer on, press Additional Functions, Scan, Copy, Scan
Now you should be in service mode from there for waste ink tank reset it is simalar to what has already been posted

2)Select Test mode which is like the last avalabe selection
3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button

The menu will now say EEPRON Clear
Select Ink count which is option (0) and press set

Then press Stop/Reset Followed by the power button and then wait for it to restart.

Senin, 07 April 2014

Download Fujitsu S7220 Drivers For Windows XP

Download Fujitsu LifeBook S7220 Fingerprint Driver Authentec Fingerprint
Download Fujitsu LifeBook S7220 Hotkey Driver Fujitsu Hotkey
Download Fujitsu LifeBook S7220 Ethernet LAN Driver Marvell Lan
Download Fujitsu LifeBook S7220 Media Slot Driver O2Micro Media Slot
Download Fujitsu LifeBook S7220 Modem Driver Agere Modem
Download Fujitsu LifeBook S7220 Touchpad Driver Synaptics Pointing
Download Fujitsu LifeBook S7220 SATA AHCI Driver Intel SATA
Download Fujitsu LifeBook S7220 Smart Card Driver O2Micro Smart Card
Download Fujitsu LifeBook S7220 Graphics Video VGA Driver Intel Video
Download Fujitsu LifeBook S7220 Wireless LAN WLAN Driver (Atheros) Atheros WLAN
Download Fujitsu LifeBook S7220 Wireless LAN Wifi Driver (Intel) Intel WLAN
Download Fujitsu LifeBook S7220 Sound Audio Driver Realtek Sound Audio
Download Fujitsu LifeBook S7220 Bluetooth DriverToshiba Bluetooth
Download Fujitsu LifeBook S7220 Webcam Camera DriverLogitech Camera
Download Fujitsu LifeBook S7220 Chipset DriverIntel Chipset

HP Photosmart B110 Driver Download

Compatibility and system requirements :

- Windows 8
- Windows 7
- WIndows Vista
- Windows XP
- all drivers Support 32bit and 64bit

Download link HP Photosmart B110 Printer drivers windows xp/7
Download link HP Photosmart B110 Printer drivers windows 8

Minggu, 06 April 2014

download resetter Epson Stylus C90

This for Epson printer. Reset your waste ink pad counter. If any question you can ask to me how to run Adjustment Program. Thank you. and Happy RESET!!
Note : tell your friend about my site. Maybe your friends is very needed.
Download Link
stylus photo C90 Verion Indonesia download
stylus photo C90 Version Singapore download

Sabtu, 05 April 2014

Canon Error Code E101 E102 E110 E120 E121 E140 E141 E142 E143 E144 E145 E146 Eror code Canon

E101 The AF motor of the laser unit is faulty.
E102 The light intensity of the laser does not reach a specific level.
E110 The polygonal scanner motor does not reach a specific speed
within a specific time.
E111 The polygonal cooling fan does not rotate properly.
E120 The temperature of the laser does not reach a specific value.
E121 The stoppage of the laser cooling fan is detected.
E140 The movable guide motor is turned ON, and a specific position
cannot be detected within a specific time.

E141 1. The capping motor is turned ON, and a specific position cannot
be detected within a specific time.
2. A specific position of the cam sensor for the recovery system cannot be
detected within a specific time.
E142 The pressure position switching motor is turned ON, and a specific
position cannot be detected within a specific time.
E143 The intake switching motor is turned ON, and a specific position
cannot be detected within a specific time.
E144 A detection signal is not returned to the ink pump monitor after the
ink pump is activated: DCC -> BHD -> pump drive signal
E145 No signal is generated from the position sensor within a specific
time after a drive signal of the cutter motor is generated.
E146 1. The waste ink full sensor is turned ON.
2. The intake counter for waste ink exceeds a specific value.

Jumat, 04 April 2014

Resetter Canon MP258




File size small in zip file




Indications: Printer Canon MP258 error P 07.

How to Reset Canon MP 258 Printer

  1. The printer is off and plugged the power cord
  2. Press STOP / RESET and hold, then press and hold the POWER
  3. POWER button is pressed, release the button STOP / RESET, then press the STOP / RESET 2 x
  4. Release both buttons simultaneously
  5. The printer will proceed in a while (a while), then the LCD Panel will show the number zero (0)
  6. The computer will detect NEW DEVICE, Ignore it
  7. This situation shows MP258 printer in a state of SERVICE MODE and ready to be reset
  8. Prepare 2 paper in the printer
  9. Run the MP258 Resetter program
  10. Click the "MAIN", then the printer will proceed, then MP258 will print one page with the words "D = 000.0"
  11. Click "Clear EEPROM"
  12. Then click "EEPROM", and the printer will print the results MP258 Resetter. One line is as follows: "TPage (TTL = 00 000 = 00 000 COPY)"
  13. Turn off the printer by pressing the POWER button
  14. completed

Kamis, 03 April 2014

How to Reset Ink Levels

How to Reset Ink LevelsInk levels are light to adjust if you mortal the straitlaced tools. A approach resetter is utilised to reset virtually every ink cartridge droppings to a whole mounting. These tools are disposable online at ink-supply stores. They amount in universal models and for proper types of machine cartridges. Impose one to gain resetting the ink even in your printer a picnic. It gift bonk near 10 seconds to perform the entire set treat. Afterward, your computer give orotund.
Square the chip-resetting means on a matted tableland with the notched move of the pattern grappling up. The conductor pins exclusive the resetter should present up, as wellspring.

2Judge the semiconductor tabs on the cut of the printer cartridge you necessary to adjust. They are copper-colored tabs, voice of the journeying on the select of the pickup.

3Connecter up the tabs with the cutting in the reset device and pushing the cartridge all the way into the mar resetter. Wait at the indorse of the resetter to see the red pale locomote on. This way conjunction between thecartridge and design has been made.

4Drive softly on the pickup until the veggie shallow starts to blink. This way the adjust has performed right.

5Supply the cartridge backwards into the machine. Effort create a attender or pic by choice it on your computer and clicking on "File" and then selecting "Indicant" as you commonly would. The printer leave begin without an evil communication.

Rabu, 02 April 2014

Canon i550 i850 and i950

http://reviews.printcountry.com/images/review/10085.jpgThis manual has been issued by Canon Inc. to provide the service technicians of this product with the information necessary for qualified persons to learn technical theory, maintenance, and repair of products. This manual covers information applicable in all localities where this product is sold. For this reason, this manual may contain information that is not applicable to your locality.

This service manual is divided into the following three parts to provide information necessary to service the i550, i850, and i950.
Part 1: Maintenance
This part describes information necessary for troubleshooting the i550, i850, and i950.
Part 2: Technical Reference
This part provides description of new technologies, etc., used in the i550, i850, and i950.
Part 3: Appendix
This part contains block diagrams, pin layouts, and product specification lists.
download here
http://www.savefile.com/files/1048170

Free Reset Canon BJC 2000 BJC 2100

Reset Waste Ink Canon

1. Remove the Cartridge
2. Unplug the AC Power Cord <-- more -->
3. Close Front access panel
4. Hold down the RESUME/RESET button and plug in the AC power cord
5. Release RESUME/RESET after plugging in the AC Power cord....
6. Press the RESUME/RESET once within
7. Seconds and release the RESUME/RESET .
8. Press and HOLD RESUME/RESET for two seconds or more and release it.
9. Press and HOLD RESUME/RESET for two seconds or more and release it.
10.Unplug AC Power Cord to set data.

Related Posts :

Selasa, 01 April 2014

HP Deskjet 1000 series

HP Deskjet 1050 All-in-One Printer
 Cartridge HP 61 black
HP 61 black catridge

 Cartridge HP 61 colour

HP 61 colour catridge

 Refill Instructions for HP 61 black|HP 61 colour

Senin, 31 Maret 2014

Reset Canon Type iP

Resetter Canon iP 1200, 1300, 1600, 1800, 1880, 2200, 2500
reset Ink Counter
Reset Waste Ink Counter
Print Head Cleaning
Cleaning
Dry Level
Change Model
EEPROM Operationand Print Head Test

iP Tool : Download
EEPROM Printer Canon ip6210D/6220D/MP170/MP450/2200/ip600 Download
MPTool MP150/MP160/MP170/MP180/MP450/MP460 Download

Minggu, 30 Maret 2014

New Product Print Head Cleaning Cartridges for Canon Pixma Printers

We are happy to announce that we have taken delivery of new Printer Head Clean Cartridges for use with Canon printers.  Two new products are available...

https://www.printercartridges.net/printercartridgesstore/index.php?main_page=product_info&cPath=222&products_id=1621
SET OF 5 HEAD CLEANING COMPATIBLE CARTRIDGES FOR CANON (TO REPLACE PGI-520BK / CLI-521 BK/C/M/Y) CONTAINING CLEANING SOLUTION AND DESIGNED TO CLEAR BLOCKED PRINT HEAD NOZZLES AND FOR USE WITH CANON iP3600 iP3680 iP4600 iP4680 iP4700 MP540 MP545 MP550 MP560 MP620 MP628 MP630 MP638 MP640 MP980 MP988 MP990 MX860 MX870 PRINTERS.

https://www.printercartridges.net/printercartridgesstore/index.php?main_page=product_info&cPath=222&products_id=1622
 SET OF 5 HEAD CLEANING COMPATIBLE CARTRIDGES FOR CANON (TO REPLACE PGI-5BK / CLI-8 BK/C/M/Y) CONTAINING CLEANING SOLUTION AND DESIGNED TO CLEAR BLOCKED PRINT HEAD NOZZLES AND FOR USE WITH CANON iP3300, iP4200, iP4300, iP4500, iP5200, iP5200R, iP5300, MP500, MP510, MP530, MP800, MP800R, MP830, MP830R, MP950, MP960, PRO 9000 ETC. PRINTERS.

Simply remove all cartridges from your printer (you have to install all of the cleaning cartridges for them to be recognised by the printer), and print as normal. Instead of ink passing through, cleaning solution will be fed through the printer and onto the paper. We recommend you print full pages of colourful pictures so that plenty of the cleaning solution is distributed through the printer.

PRICE INCLUDES FREE UK DELIVERY AND SAME WORKING DAY DISPATCH!

More products are available from our main website at http://www.printercartridges.net/

Sabtu, 29 Maret 2014

Asus F201E VivoBook for Windows 8 64 bit

Download drivers Asus F201E VivoBook for Windows 8 64-bit
Audio / Sound
Via Audio Driver version : V6.0.10.1200
File name : Audio_Via_Win7_8_VER60101200.zip
Download

Realtek Audio Driver Version : V6.0.1.6777
File name : Audio_Realtek_Win7_8_VER6016777.zip
Download

Camera / Webcam
Life Frame3 Utility Version : V3.1.9
File name : LifeFrame3_Win8_32_Win8_64_Z319.zip
Download

Card Reader
Alcor Multi-Card Reader Driver Version : V3.4.117.01527
File name : CardReader_Alcor_Win8_64_Z3411701527.zip
Download

Bluetooth
Atheros BlueTooth driver Version : V8.0.0.206
File name : Bluetooth_Atheros_Win8_64_Z800206.zip
Download

Azurewave BlueTooth driver version : V12.0.0.2200
File name : Bluetooth_Azurewave_Win8_64_Z12002200.zip
Download

Display / VGA
Intel Graphics Driver Version : V9.17.10.2875.01
File name : VGA_Intel_Win8_64_Z91710287501.zip
Download

Chipset
Intel INF Update Driver Version : V9.3.0.1021
File name : Chipset_Intel_Win8_64_Z9301021.zip
Download

USB
ASUS USB Charger Plus Version : V2.1.5
File name : USBchargerplus_ASUS_Win7_8_VER215.zip
Download

HDD / Storage
Intel Rapid Storage Technology driver Version : V11.5.0.1207
File name : IRST_Intel_Win8_64_Z11501207.zip
Download

Lan / Ethernet
Atheros LAN Driver Version : V2.1.0.7
File name : LAN_Atheros_Win8_64_Z2107.zip
Download

Wi-Fi / Wireless Lan
Atheros Wireless Lan Driver and Application Version : V6.30.59.49
File name : WLAN_Atheros_Win8_64_Z6305949.zip
Download

Atheros Wireless Lan Driver and Application Version : V10.0.0.209
File name : WLAN_Atheros_Win8_64_Z1000209.zip
Download

Jumat, 28 Maret 2014

How to Reset counter EPSON STYLUS C63 C64 C65 C66

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiE228Sd0-WdIVTRIQ0Xhhn_ttdry6tj99YFr02x92IO9wyIGetLd2gP8fIQps8v5EEkQDOD00Eys6N1GerIbhvpNSlRzX6Ws3Lh2R0fgnWg6y4Y13OV-nNHaRCxkeS7-YPVnJX2ebBNQQ/s320/Epson+Stylus.jpgResetting using adjustment program:

1. Run adjustment software by clicking “APSC6364_Ver16.exe”
2. Set model name and port, Ok
3. Click maintenance tab
4. Check waste ink pad counter
5. Click reset

Resetting using SSC serve ver 4.30

* Run SSC serve software
* Set printer model setting in ssc serve to C63/C64/C65/C66 the close the setting
* Right click ssc icon in system tray, select protections counter, select reset protection c counter.
* Clcik Yes
download software here

Driver Printer Canon PIXMA MP990 for win xp 7 8

Free Download Driver Printer Canon PIXMA MP990 for windows xp, windows 7, windows 8
Compatibility and system requirements :

- Windows 8
- Windows 7
- WIndows Vista
- Windows XP

- all drivers Support 32bit and 64bit

Download link Canon PIXMA MP990 Printer drivers
Link

Kamis, 27 Maret 2014

Resetter Canon MX318 Printer

Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printers carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
**********
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
**********
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart theprinter.
------------------------------------------------
I have tried the above steps, all steps were perform correctly; BUT I am still not able to reset the "color Ink low" message. Please HELP.

Rabu, 26 Maret 2014

Hp Canon Samsung Lexmark Epson Dotmatrix Inkjet and Laser printer repairs

All types of printer refurbishing and repairing.

All printer parts,
Computer parts and laptop parts.

Printer and Laptop adapters available.

Just contact printronics cartridge station.

High quality and reasonable rates.

Free repair estimate who visits the shop.

Printronics cartridge station deals in all types of printer repairs and cartridge refilling.
One and only famous and renowned shop for printer repairs and cartridge refilling in mulund.


Get the best rates for cartridge refilling and best quotation for printer repairing.
Deals in all types of inkjet, laser jet and dot matrix printer repairs.

Also deals in second hand printer.
Sell your old printer or if you need working second hand printer without forget contact printronics cartridge station.


Printronics cartridge station deals in all types cartridge refilling.

Laser toner and inkjet cartridge refilling.

Also you can buy compatible / recycled inkjet and laser toner cartridges from printronics.


Get your hp cartridge refilled for just rupees 60.
Cheapest printer cartridge refilling.
There are 3 refilling quality For Black Cartridge:------
General/ Normal Quality: Rs 60/-
Premium Quality : Rs 100/-
Superior Dark Pigmented Quality: Rs 150/-

There are 3 refilling Quality for color cartridges:-------------

General/ Normal Quality: Rs 100/-
Premium Quality : Rs 150/-
Superior Dark Pigmented Quality: Rs 250/-

Printronics Also deals in Laser Toner Cartridge Refilling Also:------
There are 4 refilling Quality for laser Toner cartridges:--------

General/ Normal Quality: Rs 250/-
Premium Quality : Rs 400/-
Superior Dark Graphics Quality: Rs 700/-

Super Dark high density max dpi Quality refilling: Rs 900/-


Printer cartridge refilling in mulund.For Any type of new or rare cartridge refilling please call and confirm the rates.Also deals in color laser toner cartridge refilling and refurbished.

CONTACT Number DETAILS:----- 9322302106
CONTACT PERSON;---- HEMANT.SOMAIYA/ RAJ . SOMAIYA
Visit Printronics cartridge station.
Visit Address:----
Deals in all types of Inkjet and toner cartridge refilling and compatible brands of cartridge.
Printronics cartridge station,Kapish Mall,Shop number 5,opp Brijwasi sweets,Near mulund station West,beside Monginis cake shop.

WEBSITE EMAIL.ID
you can also email at www.printronics.co.in to place order or for MORE inquiry.

Selasa, 25 Maret 2014

Reseter Printer Canon IP1880

To reset manually Ink Full Tank, try these methods :
1. Turn on Printer Canon iP 1880
2. Push and Hold resume button about 2 minutes
3. Release resume button
4. Printer will back in normal again
5. Then use the software.
6. Good Luck friend
7. If you want this permanent, Please Download Reset Tool

8. Reset tool support Canon iP2500, iP 1800, iP 1100

Download step by step canon iR1880, iP1980
Don’t forget your comment in guest book.

Senin, 24 Maret 2014

Resetting Printer Canon MP145 and Canon MP160

Procedure to reset Printer canon MP145 and Canon MP160 with Error Code Message for Printer Canon MP145 and Canon MP160, you can find error code message the end of this post:

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

Minggu, 23 Maret 2014

Canon Pixma IP1000 Waste Ink Full

My pixma IP1000 has messages "Waste Ink Full"
I try to reset with manual service mode :
- Turn off the printer, and disconnect the printer cable
- Press and hold the POWER button, turn on the printer
- The Indicator (LED) should be green
- Press and release the RESUME button, the Indicator (LED) should be orange
- Press and release the RESUME button again, the Indicator (LED) should be green
- Release both button
After I try, it work successfull. But, when I turn off the printer and I turn on again I has messages "Waste Ink Full"

How to reset permanently? Averybody, anybody, when you have another service mode help me on my printer ploblem

Sabtu, 22 Maret 2014

Driver Brother HL 4570CDWT

Free download driver printer Brother HL-4570CDWT
Compatibility and system requirements :

- Windows 7
- Windows Vista
- Windows Server 2008
- Windows Server 2003
- Windows XP

- For Windows 8 Already added on OS
- all drivers Support 32bit and 64bit -

Download link Brother HL-4570CDWT Printer drivers
Link
Brother HL-4570CDWT Windows XP Printer Driver Download
Brother HL-4570CDWT Windows XP 64-bit Printer Driver Download
Brother HL-4570CDWT Windows 7 Printer Driver Download
Brother HL-4570CDWT Windows 7 64-bit Printer Driver Download

HP LaserJet 1020

Jumat, 21 Maret 2014

Canon Mp495 driver Download for win xp 7

Free Download Driver Printer Canon MP495 For Windows xp, Windows 7
Operating System Support :
- Windows 7
- Windows 7 (x64)
- Windows Vista
- Windows Vista (x64)
- Windows XP
- Windows XP (x64)


Download Canon Mp495 driver       

Kamis, 20 Maret 2014

How To Reset Waste Ink Canon IP1500

How To Reset Waste Ink Canon IP1500
Step 1 Manual for Service mode to reset waste ink or blinking canon ip1500

1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

Step 2 Use software for Permanent to reset waste ink, read here step by step and tool to reset permanent waste ink.

Rabu, 19 Maret 2014

Adjustment Program Epson T and TX Series

Selasa, 18 Maret 2014

Other EPSON Software

Senin, 17 Maret 2014

MP390 Waste ink tank full

1. Printer ‘on.’
2. Press: “Additional Functions” button
Press “Scan” button
Press “Copy” button
Press “Scan” button
3. Now it says, “Service Mode / #1 SSSW.
4. Keep hitting “+” [which is the right arrow]; it will go through #1 to #11 (Date/Time), then “Service Report,” and, lastly, “Test Mode.” Then hit “Set.”
5. Now you will have another set of selections. Keep hitting “+” [the right arrow] to go from #1(DRAM) to #8 (Printer Test). Then hit “Set.”
6. When it finishes some sort of function, “Please Wait” will be replaced by “-8-2+” Then hit “+” and it should then say “-8-3+” and you hit “Set.”
7. The screen should now say “EEPROM Clear.” [You may need to press “Set” then, to get to the next step? My notes aren’t clear.]
8. Option 0 should be “select ink count.” Press “Set.”
9. Press the “Stop/Reset” button.
10. Press the “On/Off” button.
11. Wait for the printer to restart.

I have had the “waste ink tank near full” message twice in the almost-3-years I’ve been using my printer and it’s still functioning fine. No “waste ink” coming out the bottom!

Solution Epson C45 Blinking Resetter Epson C45

This methode to reset epson c45 blinking using software resetter. Epson C45 blinking because of counter have full. To back normal again the printer have to be reset. Software resetter for epson c45 can be use SSC service utility or Adjustment Program Epson C45.

Resetting Use Adjustment Program for Epson C45

* Download Software Adjustment Program for Epson C45
* UNZIP the file C4146.rar and RUN 94max.com file
* Choose stylus c45 in the model name then klik ok
* Click Maintenance Tab
* Check Protection counter to view counter value
* Clearing protection counter (reset counter to zero)
* Then click Ok, Ok
* done

Note : Adjustment program epson C45 can be use for printer epson C41SX, C41UX, C42SX, C42UX, C43SX, C43UX, C44UX, C46 and ME1

Resetting use SSC service utility

* SSC service utility sscserve.exe for epson printers (new version sscserve ver 4.30)
* Install the program
* Turn on the printer epson c45
* Then run SSC service utility by click Start – Program – SSC Service utility – SSC Service utility
* equalize the configuraton for your printer, for epson C45 select C4X then close configuration windows.
* Right click SSC service utility icon in System Tray.
* Then choose reset protection counter
* Turn off the printer and turn on again (Once the process is complete printer epson c45 normal again)

Minggu, 16 Maret 2014

SSC Service Utility for Epson Stylus Printers

Main features.

SSC Service Utility allow you to do many amazing things with Your Epson printer :

1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported

This allow many people with high printing demands to save some money (program works with both black and color cartridges).

Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.

NOTE ! You can lost Epson lifetime guarantee on print head by refilling ink cartridges!

Latest versions changes:

New in 4.30:
- support for R270
- support for R240
- support for R340
- support for CX2800
- support for CX3900
- support for CX4900
- support for CX5900
- support for C58/C59
- support for RX640
- improved support for C2100/2200
- improved support for RX700
- improved support for R2400
- improved support for 785EPX/825/895/915
- some other improvements and bug fixes

New in 4.20:
- support for CX4200/CX4700/CX4800/DX4200/DX4800
- support for C47/C48
- support for RX430
- support for CX6500/CX6300
- improved support for CX6400/CX6600
- improved support for RX500/RX510
- improved support for RX600/RX610
- improved support for R1800
- improved support for CX3700/CX3800/DX3800/DX3850
- improved support for C67/C68/D68
- improved support for C87/C88/D88
- many new chip models supported
- some other improvements and bug fixes

New in 4.10:
- support for PM-970C
- support for PictureMate
- support for RX700
- support for R2400
- support for PM-A700
- support for PM-G720
- support for RX520
- support for CX7800
- support for CX4100
- support for DX3800
- support for CX3800/CX3810
- support for CX3700
- support for C67/68 and Photo Editions
- support for C87/C88/D88 and Photo Editions
- support for R220/R230
- support for R320
- support for CX4500
- support for CX3650
- various bug fixes

New in 4.00:
- ability to work with additional reset device
- support for CX4600
- support for CX5300
- support for CX5100
- support for RX420
- support for RX425
- support for RX620
- support for R1800
- improved support for almost all other printers
- improved ink freezer
- improved ink monitor, implemented status information
- protection counter reset improvements
- various bug fixes

Full version history is in the help file included in distribution.

Supported printer models >>>

Please, read all instructions in help file before doing anything with Your printer!

Please, post filled test report form generated by the program (test report button) to us in case of any software problem or if Your printer is unsupported by this software (read instructions how to make test report in this case in help file) !

Program screenshots:
NOTE!

1) This is freeware project, so it is illegal to take money for this software.

2) Distribution of this software from any site other then www.ssclg.com or one of our official partners sites is prohibited!

(с) 2002-2007 SSC Localization Group

Send your test reports and support requests (with reports) to this e-mail

You can discuss software in this forum.

End user agreement

1) This software is provided "as is" without any express or implied warranty of any kind including, without
limitation, warranties of merchantability, non-infringement or fitness for any particular purpose.

2) You are liable for all risks in relation to the quality or performance of this software. In no event shall SSC Localization Group or personally, author of this software, be liable for any damages whatsoever caused to you or the third party arising out of the use or inability to use this software. Damages include general damages, special damages, accidental damages or consequential damages (including, without limitation, loss of data or accuracy or unfitting interface for other programs, or problems with peripheral equipment).

2) You understand the risk of whole head or individual nozzles clogging in case of tardy replacing of empty cartridges, as well as risk of using hot swapping function (this include frequently cartridges replacement, or wrong deblocking of parking head on some models). You understand, that resetting the ink level counters or using ink freezer function implies responsibility to carefully watch ink levels in all cartridges and timely (as soon as You see any raw white bands, even in one color) replace cardridge.

I agree with all above statements and want to download software (v4.30)

Sabtu, 15 Maret 2014

Brother MFC 7240 Drivers Download

Download Driver Printer Brother MFC-7240
Compatibility and System Requirements :
Windows 8
Windows 8 (x64)
Windows 7
Windows 7 (x64)
Windows Vista
Windows Vista (x64)
Windows XP

- File name : MFC-7240-inst-B1-USA.EXE
- File Size : 101.52MB
- Version : B1
- Release Date : 12/06/2012

How to install the drivers Printer for Windows :
1. Download the printer driver, for the download link see below
2. Make sure the printer usb cable unplugged from laptop or computer
3. Open the file has been downloaded, double click on the file
4. Follow the instructions that appear during installation
5. When finished plugged usb cable and wait detecting hardware
6. When done doing test print
7. If test print is not a problem, then we have succeeded driver installation

Download Brother MFC-7240 Driver

Source Direct Link

Jumat, 14 Maret 2014

Reset CANON Pixma iP1000

Dear all reseters

Waste Ink Counter Reset Manual for Service modeStep 1:
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

Step 2 :
Software for Permanant (1st method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000"

Sofware Download: Download

3. Select (USB PORT)
4. Choose (SET DESTINATION 1)

Kamis, 13 Maret 2014

Download Linux Ubuntu 12 10 Link Lokal

Download Linux Ubuntu - Ubuntu kemarin baru saja merilis versi terbarunya yaitu ubuntu 12.10 dengan kode nama Quantal Quetzal, ubuntu 12.10 merupakan rilis ke-17 dari dari sistem operasi Ubuntu yang akan mendapatkan dukungan selama 2 tahun, hingga April 2014.

Nah bila teman-teman ingin download linux ubuntu 12.10 (Quantal Quetzal) saya rekomendasikan mengunakan link lokal, mengapa ? link lokal lebih cenderung stabil dalam kecepatan download, berikut ini link untuk download linux ubuntu.

1. http://kambing.ui.ac.id/iso/ubuntu/releases/quantal/
2. http://repo.ugm.ac.id/iso/ubuntu/releases/12.10/

Kedua link diatas merupakan link lokal untuk men-download linux ubuntu dan jangan lupa pilih versi ubuntu sesuai kebutuhan anda. Untuk informasi saja Canonical kemarin mengumumkan versi terbaru ubuntu berikutnya yaitu Ubuntu 13.04 dengan kode nama Raring Ringtail yang akan dirilis pada 25 April 2013 nanti.

Demikian artikel mengenai download linux ubuntu yang dapat saya tuliskan, semoga bisa bermanfaat bagi yang membutuhkannya.

Rabu, 12 Maret 2014

Removal and replacement Fuser motor assembly M299 hp laserjet p 4010 and 4015 series

Fuser-motor assembly (M299)

1 . Remove the following components:
• Top accessory cover.
• Formatter cover and cage.
• Top cover.
• Right-side cover.
• DC controller.
2. Release one spring (callout 1 ).

A CAUTION: The spring is not captive. Do not lose the spring. _


Figure Remove the fuser-motor assembly

3. Remove two screws (callout 2) and then remove the guide (callout 3).

Figure  Remove the fuser-motor assembly


4. Disconnect one wire-harness connector (callout 4), and then remove three screws (callout 5). Remove the fuser-motor assembly.

^ NOTE: You must install the fuser-motor wire harness on the replacement fuser-motor assembly.

Figure  Remove the fuser-motor assembly

Download Driver Web Camera IballFace2Face C8 0

Iball Face2Face C8.0 Specifications :
Image Sensor:
High quality 1/4 CMOS sensor
Effective Pixels:
480K pixels ( Interpolated 8M pixels still image & 4M pixels video)
Video Resolution:
Max. upto 2304 x 1728 pixels
Image Resolution:
Max. upto 3264 x 2448 pixels
Frame Rates:
30 frames per second
Colour Depth:
24-Bit True Colour
Interface:
USB 2.0, backward compatible to USB 1.1
Focus:
5 cm to Infinity
Microphone:
Built-in high sensitive USB microphone
Snap Shot Button:
Built-in snap shot button
Night Vision:
6 LED’s for night vision, with brightness controller
Low Light Boost:
Automatic low light boost
White Balance:
Auto
Auto Exposure:
Auto
Auto Compensation:
Auto
Auto Tracking:
Auto face tracking function
Zoom:
4X Digital Zoom
Video Effects:
10 photo frames and 16 special effects
OS Compatibility:
Windows XP / Vista & 7
Bundled Softwares:
Driver for Windows with 10 Photo frames, 16 Special effects & Auto Face Tracking and more.
MRP:
Rs. 1199/-
Warranty:
2 Years
Click below links to Download Software Driver for Iball Face2Face C8.0 Webcam.