Masalah Absober Tank Is Full Canon

Cara Mengatasi :Waste Ink Tank Almost Full

You can reset the waste ink tank counter yourself. Be aware that this doesnt actually empty the waste ink tank itself (a little felt pad deep inside your printer), but it does allow you to continue printing.

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice, then release all buttons
5: When the indicator lights steady, press RESUME three or four times. The indicator should be orange.
6: Press Power to set data

To actually drain the waste ink tank, youll need to take your printer to pieces and find, clean, wash and dry the felt pads found in the base of the printer. This is a complicated procedure, but it is a good idea to do it if youre technically minded. Many people have just reset the code without actually draining the pads and very few have run into problems as a result. If you do this, you risk damaging your printer and/or the surface it sits on if the pads absorb too much ink. However, if youre going to buy a new printer anyway, you might just reset the code and stand it on a piece of paper or card. Its up to you, just understand the risks.Good Luck!

HP 4000 4050 4100 5000 Printers

1. Turn the printer off
2. Hold down the left side of the
ITEM and VALUE +/- keys, turn the printer on and wait
until RESET MAINTENANCE COUNT is displayed and then release the keys

Canon BJC 5000

1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody

RESET WASTE INK TANK CANON

For seri i250, i255, i350, i355, PIXUS 350i

indicates :
WASTE INK TANK Full, printer has no respon

The Solutions :

1. Download i320 Service Tool or 350,355,250,255 Service Tool
2. Do service mode procedure to printer, the methods are ::
- Turn off printer, Take off USB cabel dan power cabel
- Push and hold POWER button, take on power, Turn on printer
- Indikator LED will be in green colour
- Push and let RESUME button, indicator LED will be in yellow colour
- Push and let RESUME button once more, indicator LED will be in green colour
- Let POWER button

This time printer in MODE SERVICE

Reset Manual i255-i355.pdf
ManualReset_i320.pdf

3. Do reset waste ink tank procedure with :
4. take on USB cabel
5. Do program General Tool
6. The Figure will be like this :
7. Choose the parameter no 1
8. Put on no 2 according to printer canon, DON”T BE WRONG!!!
9.Congratulation… printer has been in Reset.

Printer Service Manual Canon i470D i475D

This manual has been issued by Canon Inc., to provide the service technicians of this product with the information necessary for qualified persons to learn technical theory, maintenance, and repair of products. The manual covers information applicable in all regions where the product is sold. For this reason, it may contain information that is not applicable to your region.

This service manual consists of the following three parts to provide information necessary to service the i470D

Part 1: Maintenance
Information on maintenance and repair of the i470D

Part 2: Technical Reference
New technology and technical information such as FAQ’s (Frequently Asked Questions) of the i470D

Part 3: Appendix
Block diagrams and pin layouts of the i470D

Reference:
This manual does not provide sufficient information of disassembly and reassembly procedures. Refer to the graphics in the separate Parts Catalog.

http://www.savefile.com/files/1037657

Canon MP390

1)Printer on, press Additional Functions, Scan, Copy, Scan
Now you should be in service mode from there for waste ink tank reset it is simalar to what has already been posted

2)Select Test mode which is like the last avalabe selection
3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button

The menu will now say EEPRON Clear
Select Ink count which is option (0) and press set

Then press Stop/Reset Followed by the power button and then wait for it to restart.

Download Fujitsu S7220 Drivers For Windows XP

Download Fujitsu LifeBook S7220 Fingerprint Driver Authentec Fingerprint
Download Fujitsu LifeBook S7220 Hotkey Driver Fujitsu Hotkey
Download Fujitsu LifeBook S7220 Ethernet LAN Driver Marvell Lan
Download Fujitsu LifeBook S7220 Media Slot Driver O2Micro Media Slot
Download Fujitsu LifeBook S7220 Modem Driver Agere Modem
Download Fujitsu LifeBook S7220 Touchpad Driver Synaptics Pointing
Download Fujitsu LifeBook S7220 SATA AHCI Driver Intel SATA
Download Fujitsu LifeBook S7220 Smart Card Driver O2Micro Smart Card
Download Fujitsu LifeBook S7220 Graphics Video VGA Driver Intel Video
Download Fujitsu LifeBook S7220 Wireless LAN WLAN Driver (Atheros) Atheros WLAN
Download Fujitsu LifeBook S7220 Wireless LAN Wifi Driver (Intel) Intel WLAN
Download Fujitsu LifeBook S7220 Sound Audio Driver Realtek Sound Audio
Download Fujitsu LifeBook S7220 Bluetooth DriverToshiba Bluetooth
Download Fujitsu LifeBook S7220 Webcam Camera DriverLogitech Camera
Download Fujitsu LifeBook S7220 Chipset DriverIntel Chipset