indicates : WASTE INK TANK Full, printer has no respon
The Solutions :
1. Download i320 Service Tool or 350,355,250,255 Service Tool 2. Do service mode procedure to printer, the methods are :: - Turn off printer, Take off USB cabel dan power cabel - Push and hold POWER button, take on power, Turn on printer - Indikator LED will be in green colour - Push and let RESUME button, indicator LED will be in yellow colour - Push and let RESUME button once more, indicator LED will be in green colour - Let POWER button
3. Do reset waste ink tank procedure with : 4. take on USB cabel 5. Do program General Tool 6. The Figure will be like this : 7. Choose the parameter no 1 8. Put on no 2 according to printer canon, DON”T BE WRONG!!! 9.Congratulation… printer has been in Reset.
My pixma IP1000 has messages "Waste Ink Full" I try to reset with manualservice mode : - Turn off the printer, and disconnect the printer cable - Press and hold the POWER button, turn on the printer - The Indicator (LED) should be green - Press and release the RESUME button, the Indicator (LED) should be orange - Press and release the RESUME button again, the Indicator (LED) should be green - Release both button After I try, it work successfull. But, when I turn off the printer and I turn on again I has messages "Waste Ink Full"
How to reset permanently? Averybody, anybody, when you have another service mode help me on my printer ploblem
1. Printer ‘on.’ 2. Press: “Additional Functions” button Press “Scan” button Press “Copy” button Press “Scan” button 3. Now it says, “Service Mode / #1 SSSW. 4. Keep hitting “+” [which is the right arrow]; it will go through #1 to #11 (Date/Time), then “Service Report,” and, lastly, “Test Mode.” Then hit “Set.” 5. Now you will have another set of selections. Keep hitting “+” [the right arrow] to go from #1(DRAM) to #8 (Printer Test). Then hit “Set.” 6. When it finishes some sort of function, “Please Wait” will be replaced by “-8-2+” Then hit “+” and it should then say “-8-3+” and you hit “Set.” 7. The screen should now say “EEPROM Clear.” [You may need to press “Set” then, to get to the next step? My notes aren’t clear.] 8. Option 0 should be “select ink count.” Press “Set.” 9. Press the “Stop/Reset” button. 10. Press the “On/Off” button. 11. Wait for the printer to restart.
I have had the “waste ink tank near full” message twice in the almost-3-years I’ve been using my printer and it’s still functioning fine. No “waste ink” coming out the bottom!
The below reset procedure worked for me. I did not have to clean the waste-ink sponge. Many thanks to lp who originally posted it and to "Anonymous" who reposted it.
1)Printer on, press Additional Functions, Scan, Copy, Scan Now you should be in service mode from there for waste ink tank reset
2)Select Test mode which is like the last avalabe selection 3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button
The menu will now say EEPRON Clear Select Ink count which is option (0) and press set
Then press Stop/Reset Followed by the power button and then wait for it to restart.
How to reset waste ink / blinking printer canon ip4200
With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
While holding the Power button, release theresume/Cancel button. (DO NOT release the Power button.)
While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s) setting).
Time(s) LED indication Function Remarks 0 times Green (Power) Power off When the print head is not installed, the carriage returns and locks in the home position capped. 1 time Orange (Alarm) Service test print . 2 times Green (Power) EEPROM information print 3 times Orange (Alarm) EEPROM initialization 4 times Green (Power) Waste ink counter resetting 5 times Orange (Alarm) Destination settings After entering the destination settings mode, press the Resume/Cancel button the specified number of time(s) to select the destination. For detail, see "Destination settings procedures" below. 6 times Green (Power) Print head deep cleaning (Cleaning of both black and color) 7 times Orange (Alarm) Reserved 8 times Green (Power) CD / DVD check pattern 9 times Orange (Alarm) CD / DVD print position correction (horizontal: X direction) 10 times Green (Power) CD / DVD print position correction (vertical: Y direction) 11 to 13 times Orange, Green, Orange(Alarm, Power,Alarm) Return to the menu selection 14 times Green (Power) Left margin correction Not used in servicing. 15 times Orange (Alarm) Return to the menu selection
Time(s) LED indication Destination CD / DVD print 0 times Green (Power) No change of the destination 1 time Orange (Alarm) Japan Supported 2 times Green (Power) Korea Not supported 3 times Orange (Alarm) US Not supported 4 times Green (Power) Europe Supported 5 times Orange (Alarm) Australia Supported
.jpg)
