Resetting using adjustment program:
1. Run adjustment software by clicking “APSC6364_Ver16.exe”
2. Set model name and port, Ok
3. Click maintenance tab
4. Check waste ink pad counter
5. Click reset
Resetting using SSC serve ver 4.30
* Run SSC serve software
* Set printer model setting in ssc serve to C63/C64/C65/C66 the close the setting
* Right click ssc icon in system tray, select protections counter, select reset protection c counter.
* Clcik Yes
download software here
Compatibility and system requirements :Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printers carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
**********
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
**********
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart theprinter.
------------------------------------------------
I have tried the above steps, all steps were perform correctly; BUT I am still not able to reset the "color Ink low" message. Please HELP.
.jpg)
